Ville Ilvonen <ville.ilvonen@unikie.com> writes:
On 9/15/22 17:00, Alyssa Ross wrote:
Ville Ilvonen <ville.ilvonen@unikie.com> writes:
On 9/15/22 16:22, Alyssa Ross wrote:
José Pekkarinen <jose.pekkarinen@unikie.com> writes:
A mechanism to generate a full image from the nix generated artifacts putting together kernel, initrd, rootfs and ext partition so that the full image can be flashed in a sdcard of choice and use it. This would require to be configurable so that you can modify the partition table to suit vendor needs.
We've had some discussion about that already on the list and on IRC. My current view is that early boot firmware (U-Boot etc.) doesn't really have anything to do with Spectrum. They both run at different times, and they communicate over a standard interface (EBBR [1]), so the specifics of the firmware aren't really in scope for Spectrum itself and belong elsewhere. It doesn't make sense for Spectrum to be installing U-Boot any more than it makes sense for U-Boot to be installing Spectrum, or for Linux to be installing U-Boot — they are two separate components. (This isn't an approach unique to Spectrum — Fedora is doing something similar.)
It can make sense to make an image that is a combination of U-Boot and Spectrum, but that process should be part of an integration between the two that exists one layer up, rather than part of either project. For example, you could do something like this:
let spectrum = import <spectrum/img/live> { # config could either be loaded using the standard mechanism # or inlined here. }; # It would also be possible to import individual components of # Spectrum and assemble them manually if even greater # flexibility was required, but I doubt that would be common.
inherit (spectrum) pkgs; # I don't think a pkgs attribute currently exists on the # spectrum-live.img derivation, but it might make sense to add # for this sort of use case.
uboot = pkgs.ubootRockPro64; in
pkgs.runCommand "uboot+spectrum.img" {} '' # Use sfdisk (or maybe there's some better tool) # to create a partition table, and copy the U-boot image # and the Spectrum images into place. # # Spectrum is designed to accomodate this by not expecting # any of its partitions to be at any particular location # on disk. ''
Maybe this is another case where documentation and a worked example would help?
Documented example case would help. It's good to scope but in the big picture it's hard to see early boot firmware would have *nothing* to do with Spectrum. That's not the case with x86_64 either.
Let me clarify. On x86 traditionally people can't change early bootloading. -> Spectrum assumes UEFI OS loading because UEFI is just there and can't be changed On arm traditionally people can and will change early bootloading. -> Spectrum has assumed UEFI but UEFI is just not there. It's must be put there - typically on device SD card or eMMC image. On riscv assumption is more like on arm.
So the mechanism is essential, even when not *provided* by Spectrum it should be acknowledged. Documenting Spectrum reqs to boot itself with example determines how easily people can make their devices run Spectrum.
Agreed, that's why I was pleased to discover the EBBR spec recently, which defines exactly this: "an interface between platform firmware and an operating system that is suitable for embedded platforms", designed for U-Boot with UEFI like we were already targeting. So we can say "Spectrum aims to implement EBBR on aarch64" (and on RISC-V when we get there if that's the right thing to do), and that way there's a lovely long document that explains what is Spectrum's responsibility to do, and what is the firmware's responsibility to do. And when something goes wrong, we'll be able to refer to the spec to determine whether it's a problem with Spectrum, or with the platform firmware.
And of course we can have some documentation that introduces EBBR to an audience that's not necessarily familiar with it, and provides an example of how an EBBR system comprising both Spectrum and U-Boot might be put together, expanding on what I included as the example in my previous message. That should be more than enough to acknowledge the mechanism, right?
Example with some device(s) defines the usefulness - to get Spectrum running on that device. Documentation with link to EBBR could be additional reading. The last practical question is where the device specific implementations of ebbr (e.g. u-boot) are stored. I'm reading out of Spectrum tree but the "glue" nix (your example of uboot+spectrum) would be needed somewhere. Could that be in Spectrum tree to be useful for Spectrum users?
Well, there are a couple of things here: The first is that the glue Nix is only needed if you want to have the firmware and the Spectrum partitions on the same image. This is something that's supported, but recommended against (see the Firmware Storage section of the EBBR spec [1] — that also mirrors the recommendations I've heard from both the Tow-Boot and Fedora ARM maintainers.) That's not to say it's not a legitimate thing to do — I understand that it's nice to be able to just download a single image and have everything work, especially when Spectrum is one part of a bigger vision — so it's not like it's unsupported, but the happy path that the community seems to be heading towards (and therefore the one that I'd expect to recommend to end users that are coming directly to Spectrum) is that users should first install platform firmware if required (perhaps using a distribution like Tow-Boot) onto dedicated storage as part of setting up their device, and then install whatever EBBR-compliant distro they want onto main storage. In the best case, where the hardware is well supported by mainline Linux, they get a working device without needing to track down or build a special image. If they're not quite so lucky, they still don't need to worry about the specifics of combining firmware and OS into a single image, and neither do we. The second thing is that the Nix glue is board specific. It has to know how to build U-Boot, and how to install it in the image at the correct offset. But it isn't really specific to Spectrum at all. The only interaction it needs to have with Spectrum is copying its partitions into the right place, and the only implementation details of Spectrum it needs to depend on are that Spectrum comes as a GPT image, and that it doesn't mind if the offset of its partitions changes. So if you wanted a reusable way to combine an OS image and a platform fimware image into a single image with Nix, I think that would make more sense as a seperate project outside of Spectrum, since it would also work with almost any other OS. I know there's been talk among NixOS aarch64 users/developers about re-doing how NixOS builds SD card images, and this feels very relevant to that conversation. This could, for example, be part of a future, improved version of nixos-hardware, and as long as it didn't depend on any NixOS specifics, it could work whether the OS being installed is NixOS, Spectrum, Fedora, or anything else, as long as it implements EBBR. [1]: https://arm-software.github.io/ebbr/index.html#firmware-storage